®
ABB i-bus
KNX
Commissioning
3.3.2.2.3
Output A,B: Switch actuator - Scene parameter window
All settings for the Scene function are undertaken in this parameter window.
It is visible if the Enable function Scene parameter is enabled in Output A,B: Switch actuator (only "UP"
contact) parameter window, p. 38.
50 2CDC506083D0201 | JRA/S 6.230.3.1
How is a scene set?
Via the Scene group object
•
standard values can be set for the output.
•
The scene can be recalled.
•
The scene can be changed.
•
The scene can be saved.