Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
3.4.2
General group objects
No.
0
The group object is enabled if the Send group object "In operation" is set to Yes in the General parameter window.
In order to regularly monitor the presence of the device on the KNX, an in operation monitoring telegram can be sent cyclically
on the bus.
As long as the group object is activated, it sends a parametrizable In operation telegram.
Telegram value
1
The group object is enabled if the parameter Enable group object "Request status values" 1 bit is set to Yes in the General
parameter window.
If this group object receives a telegram with the value x (x = 0; 1; 0 or 1), all status objects are sent on the bus, provided they
are set to On change or After request or After a change or request.
Option x = 1 produces the following function:
Telegram value:
98 2CDC506083D0201 | JRA/S 6.230.3.1
Function
In operation
1 = system in operation with option Send value 1 cyclically
0 = System in operation with option Send value 0 cyclically
Request status values
1 = all status messages are sent.
0 = No status messages are sent.
Object name
System
General
Data type
Flags
1 bit
C, T
DPT 1.002
1 bit
C, W
DPT 1.017
Advertisement
Table of Contents
