Parameter Window A: Scene - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
3.2.3.1.3 Parameter window
A: Scene
82 2CDC 505 056 D0207 | SA/S
Commissioning
In this parameter window, all settings for the function Scene are undertaken.
This parameter is visible if in parameter window
parameter Function Scene has been enabled.
With the parameter Overwrite scene, preset and threshold value 1 with
download in parameter window A: General, it is possible that the scene
values set via the bus with a download cannot be overwritten and must be
protected.
Output assigned to
(Scene 1...64)
Options: no allocation
Scene 1
...
Scene 64
With the function Scene, up to 64 different scenes are managed via a single
group address. With this group address, all slaves who are integrated into a
scene, are linked via a 1 byte communication object. The following
information is contained in a telegram:
Number of the scene (1...64) as well as

Telegram: Call scene or Save scene.

The output can be integrated in up to five scenes. So for example, the scene
can be switched on in the morning and switched off in the evening, or the
output can be integrated into light scenes.
Function, page 64, the
A: