Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
3.3
Parameters
The ETS Engineering Tool Software is used to parametrize the device. The application is available in ETS
under ABB/Blind/Switch.
This chapter describes the device parameters using the parameter windows. Parameter windows are
structured dynamically so that further parameters are enabled depending on the parametrization and
function of the outputs.
The default values of the parameters are underlined, e.g.:
Options:
Note
The device features several inputs/outputs. As the functions are identical for all inputs/outputs, they will
be explained using input/output A/B as an example.
Yes
No
JRA/S 6.230.3.1 | 2CDC506083D0201 17
Advertisement
Table of Contents
