Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
3.3.3.3
Input a: Dim sensor parameter window
The operation mode allows the operation of dimmable lighting. This parameter window is visible if the
Switch/Dimming sensor option is selected in the Input a Function parameter window, p. 64.
Enable group object
"Block" 1-bit
Options:
•
Yes: The 1-bit group object Block is enabled. This can be used to disable the input.
Note
If the input is disabled and the option Send cyclically is set, the last state is still sent regardless of the
block. The option Block still blocks the physical input, sending continues internally.
80 2CDC506083D0201 | JRA/S 6.230.3.1
No
Yes
Advertisement
Table of Contents
