Table of Contents
Advertisement
®
ABB i-bus
KNX
Device technology
2
Device technology
JRA/S 6.230.3.1
2.1
Technical data
Power supply
* The maximum power consumption of the
device results from the following specifications:
Connections
Operating and display elements
Protection degree
Protection class
Isolation category
KNX safety extra low voltage
The Blind/Roller Shutter Actuator with
Binary Inputs is a modular installation
(MDRC) device in Pro M design. It is
intended for installation in the distribution
board on 35 mm mounting rails. Physical
address assignment and device
parametrization are carried out using
ETS and the current application.
Bus voltage
Current consumption, bus
Leakage loss, bus
Leakage loss, device
Relay 6 A
Blind output
KNX
Circuits
Ferrules without/with plastic sleeves
TWIN ferrules
Tightening torque
Push button/LED
IP 20
II
Overvoltage category
Pollution degree
SELV 24 V DC
The JRA/S 6.230.3.1 is powered via the
®
ABB i-bus
and does not require an
additional auxiliary voltage supply.
The device is ready for operation after
connecting the bus voltage.
21...32 V DC
Maximum 12 mA (Fan-in 1)
Maximum 250 mW
Maximum 4.8 W *
6 x 0.8 W
6 x 6 A, AC3, 250 V AC
Via bus connection terminals, 2-fold (red/black)
0.8 mm Ø, single core
Screw terminal with universal head (PZ 1)
0.2...4 mm² stranded, 2 x (0.2...2.5 mm²)
0.2...6 mm² single core, 2 x (0.2...4 mm²)
without: 0.25...2.5 mm²
with: 0.25...4 mm²
0.5...2.5 mm²
Max. 0.6 Nm
For assignment of the physical address
To DIN EN 60 529
To DIN EN 61 140
III according to EN 60 664-1
2 to EN 60 664-1
JRA/S 6.230.3.1 | 2CDC506083D0201 7
Advertisement
Table of Contents
