Table of Contents
Advertisement
®
ABB i-bus
KNX
Planning and application
4.3.3
Download
Note
After a download with a change, the application complies in behaviour to a reset of the device in the
ETS.
Switch contact output
The Staircase lighting time group object value remains unchanged.
The Disable function Time group object value remains unchanged.
The Permanent ON group object value remains unchanged.
The switch contact output remains unchanged.
Blind/shutter
Note
If the Activation of autom. control group object has not been assigned a group address, the Automatic
function is deactivated when there is a download.
138 2CDC506083D0201 | JRA/S 6.230.3.1
Exception: The group object value is set to 0 if nothing is assigned to the object.
Note
Otherwise, the block for the Time function is removed if the Disable function Time group object is
not available.
The switch contact output will otherwise use the new parameters.
Advertisement
Table of Contents
