Resetting Bgp Session; Clearing Bgp Information; Bgp Configuration Examples; Bgp Basic Configuration Example - HPE 5800 Series Configuration Manual

Task
Display the global router ID.

Resetting BGP session

Task
Reset the specified BGP
session.
Reset all IPv4 unicast
BGP sessions.

Clearing BGP information

Task
Clear dampened BGP
routing information and
release suppressed routes.
Clear route flap information.

BGP configuration examples

BGP basic configuration example

Network requirements
As shown in
and Switch C so that Switch C can access the network 8.1.1.0/24 connected to Switch A.
Figure 71 Network diagram
Configuration procedure
Configure IP addresses for interfaces. (Details not shown.)
1.
Command
reset bgp { as-number | ip-address |
all | external | group group-name |
internal }
reset bgp ipv4 all
Command
reset bgp dampening [ ip-address
[ mask | mask-length ] ]
reset bgp flap-info [ ip-address
[ mask-length | mask ] | as-path-acl
as-path-acl-number | regexp
as-path-regular-expression ]
reset bgp peer-ip-address flap-info
Figure 71, run EBGP between Switch A and Switch B, and run IBGP between Switch B
Command
display router id [ | { begin | exclude | include }
regular-expression ]
217
Remarks
Available in
any view.
Remarks
Available in user view.
Available in any view.
Remarks
Available in user view.
Available in user view.