Bgp Configuration Views - HPE 5800 Series Configuration Manual

The system supports multiple MP-BGP extensions, including VPN extension (see MPLS
Configuration Guide), IPv6 extension (see
Multicast Configuration Guide).
Address family
MP-BGP uses address families and subsequent address families to differentiate network layer
protocols of routes contained in the MP_REACH_NLRI and MP_UNREACH_NLRI attributes. For
example, an address family identifier (AFI) of 2 and subsequent AFI (SAFI) of 1 indicates IPv6
unicast routing information carried in the MP_REACH_NLRI attribute. For address family values, see
RFC 1700.

BGP configuration views

Table 7 shows views for different address families supported by BGP. This chapter describes
configurations in BGP view and BGP-VPN view.
Table 7 BGP configuration views
View names
BGP view
BGP-VPN instance view
IPv6 address family view
IPv6 BGP-VPN instance
view
BGP-VPNv4 sub-address
family view
"Configuring IPv6
Ways to enter the views
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp]
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp]
ipv4-family vpn-instance
vpn1
[Sysname-bgp-ip
v4-vpn1]
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp]
ipv6-family
[Sysname-bgp-af
-ipv6]
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp]
ipv6-family vpn-instance
vpn1
[Sysname-bgp-ip
v6-vpn1]
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp]
ipv4-family vpnv4
[Sysname-bgp-af-vpnv4]
178
BGP"), and multicast extension (see IP
Remarks
Configurations in this view are effective
for routes in all address families and VPN
instances (such as confederation and
GR), or for IPv4 unicast routes on the
public network (such as local route
advertisement, IGP route redistribution,
route summarization, and BGP route
distribution/reception filtering policies).
Configurations in this view are effective
only for IPv4 unicast routes in the
specified VPN instance.
Configurations in this view are effective
only for IPv6 unicast routes on the public
network.
Configurations in this view are effective
only for IPv6 unicast routes in the
specified VPN instance.
Configurations in this view are effective
only for VPNv4 routes.