HPE 5800 Series Configuration Manual page 165
Layer 3 - ip routing
Hide thumbs
Also See for 5800 Series:
- Installation manual (126 pages) ,
- Configuration manual (412 pages) ,
- Configuration manuals (259 pages)
Table of Contents
Advertisement
[SwitchC-isis-1] quit
[SwitchC] interface vlan-interface 200
[SwitchC-Vlan-interface200] isis enable 1
[SwitchC-Vlan-interface200] quit
[SwitchC] interface vlan-interface 100
[SwitchC-Vlan-interface100] isis enable 1
[SwitchC-Vlan-interface100] quit
[SwitchC] interface vlan-interface 300
[SwitchC-Vlan-interface300] isis enable 1
[SwitchC-Vlan-interface300] quit
# Configure Switch D.
<SwitchD> system-view
[SwitchD] isis 1
[SwitchD-isis-1] is-level level-2
[SwitchD-isis-1] network-entity 20.0000.0000.0004.00
[SwitchD-isis-1] quit
[SwitchD] interface interface vlan-interface 300
[SwitchD-Vlan-interface300] isis enable 1
[SwitchD-Vlan-interface300] quit
# Display IS-IS routing information on each switch.
[SwitchA] display isis route
IPV4 Destination
--------------------------------------------------------------------------
0.0.0.0/0
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
[SwitchC] display isis route
IPV4 Destination
--------------------------------------------------------------------------
10.1.1.0/24
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
IntCost
ExtCost ExitInterface
10
NULL
10
NULL
20
NULL
20
NULL
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
IntCost
ExtCost ExitInterface
10
NULL
154
NextHop
VLAN100
10.1.1.1
VLAN100
Direct
VLAN100
10.1.1.1
VLAN100
10.1.1.1
NextHop
VLAN100
Flags
R/-/-
D/L/-
R/-/-
R/-/-
Flags
Direct
D/L/-
Advertisement
Table of Contents
Troubleshooting
