HPE 5800 Series Configuration Manual page 61

# Configure a static route to Switch A on Switch C.
[SwitchC] ip route-static 192.168.1.0 24 vlan-interface 200 192.168.2.1
Verify the configuration:
5.
# Display the BFD session information on Switch A.
<SwitchA> display bfd session
Total Session Num: 1
Session Working Under Ctrl Mode:
LD/RD
6/3
# Display the RIP routes destined for 100.1.1.0/24 on Switch A.
<SwitchA> display ip routing-table 100.1.1.0 24 verbose
Routing Table : Public
Summary Count : 2
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 192.168.2.2
BkNextHop: 0.0.0.0
RelyNextHop: 192.168.1.2
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active Adv GotQ
Tag: 0
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 192.168.3.2
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Inactive Adv
Tag: 0
When the link over VLAN-interface 100 fails, Switch A quickly detects the link state change.
# Display the BFD information on Switch A.
<SwitchA> display bfd session
Switch A has deleted the BFD session on VLAN-interface 100 to Switch C and displays no
output.
# Display the RIP routes of RIP process 1 on Switch A.
<SwitchA> display rip 1 route
Route Flags: R - RIP, T - TRIP
P - Permanent, A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------------------
The output shows that the RIP route learned from Switch C no longer exists.
# Display the RIP routes destined for 100.1.1.0/24 on Switch A.
<SwitchA> display ip routing-table 100.1.1.0 24 verbose
Init Mode: Active
SourceAddr DestAddr
192.168.1.1 192.168.2.2
Process ID: 1
Interface: vlan-interface 100
BkInterface:
Neighbor: 192.168.1.2
Process ID: 2
Interface: vlan-interface 300
BkInterface:
Neighbor: 192.168.3.2
50
State Holdtime Interface
Up
Cost: 1
QosLcId:
Label: NULL
BKLabel: NULL
Age: 00h00m47s
Cost: 2
QosLcId:
Label: NULL
BKLabel: NULL
Age: 00h12m50s
1700ms vlan100