Advertising A Default Route To An Ipv6 Peer Or Peer Group; Configuring Outbound Route Filtering - HPE 5800 Series Configuration Manual

Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address
3.
family view.
Configure manual
4.
route summarization.

Advertising a default route to an IPv6 peer or peer group

Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family
3.
view.
Advertise a default route
4.
to an IPv6 peer or peer
group.
NOTE:
With the peer default-route-advertise command executed, the local router advertises a default
route with itself as the next hop to the specified IPv6 peer or peer group, regardless of whether the
default route is available in the routing table.

Configuring outbound route filtering

Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family
3.
view or IPv6 BGP-VPN
instance view.
Configure the filtering of
4.
outgoing routes.
Apply a routing policy to
5.
routes advertised to an IPv6
peer or peer group.
Command
system-view
bgp as-number
ipv6-family
aggregate ipv6-address prefix-length [ as-set |
attribute-policy route-policy-name |
detail-suppressed | origin-policy
route-policy-name | suppress-policy
route-policy-name ] *
Command
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
default-route-advertise [ route-policy
route-policy-name ]
Command
system-view
bgp as-number
ipv6-family [ vpn-instance
vpn-instance-name ]
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name } export
[ protocol process-id ]
peer { ipv6-group-name | ipv6-address }
route-policy route-policy-name export
322
Remarks
N/A
N/A
N/A
Not configured by
default.
Remarks
N/A
N/A
N/A
Not advertised by
default.
Remarks
N/A
N/A
N/A
Not configured by default.
Not applied by default.
The IPv6 BGP-VPN
instance view does not
support the
ipv6-group-name argument.