HPE 5800 Series Configuration Manual page 195

Step
Enter system view.
1.
Enter BGP view or
2.
BGP-VPN instance view.
Create an EBGP peer group.
3.
Specify the AS number for
4.
the group.
Add a peer into the EBGP
5.
peer group.
Enable a peer.
6.
Configure a description for a
7.
peer group.
NOTE:
• You can specify an AS number for a peer before adding it into the peer group. The AS number
must be the same as that of the peer group.
• All of the added peers have the same AS number as that of the peer group.
To configure an EBGP peer group by using Approach 2:
Step
Enter system view.
1.
Enter BGP view or
2.
BGP-VPN instance view.
Create an EBGP peer group
3.
Create a BGP peer and
4.
specify its AS number.
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance
view:
a. bgp as-number
b. ipv4-family
vpn-instance
vpn-instance-name
group group-name external
peer group-name as-number
as-number
peer ip-address group
group-name [ as-number
as-number ]
peer ip-address enable
peer group-name description
description-text
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance
view:
a. bgp as-number
b. ipv4-family
vpn-instance
vpn-instance-name
group group-name external
peer ip-address as-number
as-number
184
Remarks
N/A
Use either approach.
By default, no EBGP peer group
is created.
By default, no AS number is
specified.
By default, no peer exists in the
peer group.
To use the as-number
as-number option, you must
specify the AS number configured
by the peer group-name
as-number as-number
command.
Optional.
Enabled by default.
Optional.
By default, no description is
configured for the peer group.
Remarks
N/A
Use either approach.
N/A
N/A