Task
Perform soft reset
on IPv6 BGP
connections.
Reset IPv6 BGP
connections.
Clearing IPv6 BGP information
Task
Clear dampened IPv6 BGP
routing information and
release suppressed routes.
Clear IPv6 BGP route flap
information.
IPv6 BGP configuration examples
Some examples for IPv6 BGP configuration are similar to those of BGP4. For more information, see
"Configuring
IPv6 BGP basic configuration example
Network requirements
All switches in
Switch B, Switch C, and Switch D are fully meshed through IBGP connections.
Figure 99 Network diagram
Configuration procedure
Configure IPv6 addresses for interfaces. (Details not shown.)
1.
Configure IBGP connections:
2.
# Configure Switch B.
<SwitchB> system-view
[SwitchB] ipv6
Command
refresh bgp ipv6 { ipv4-address | ipv6-address | all |
external | group ipv6-group-name | internal } { export |
import }
reset bgp ipv6 { as-number | ipv4-address | ipv6-address
| all | external | group group-name | internal }
Command
reset bgp ipv6 dampening [ ipv6-address
prefix-length ]
reset bgp ipv6 flap-info
[ ipv6-address/prefix-length | as-path-acl
as-path-acl-number | regexp as-path-regexp ]
reset bgp ipv6 peer-ipv6-address flap-info
BGP."
Figure 99
run IPv6 BGP. Between Switch A and Switch B is an EBGP connection.
337
Remarks
Available in user view.
Available in user view.
Remarks
Available in user view.
Available in user view.