HPE 5800 Series Configuration Manual page 166

10.1.2.0/24
192.168.0.0/24
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
IPV4 Destination
--------------------------------------------------------------------------
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
[SwitchD] display isis route
IPV4 Destination
--------------------------------------------------------------------------
10.1.1.0/24
10.1.2.0/24
192.168.0.0/24
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Configure RIPv2 on Switch D and Switch E, and configure route redistribution from RIP to IS-IS
3.
on Switch D:
# Configure RIPv2 on Switch D.
[SwitchD] rip 1
[SwitchD-rip-1] network 10.0.0.0
[SwitchD-rip-1] version 2
[SwitchD-rip-1] undo summary
# Configure RIPv2 on Switch E.
[SwitchE] rip 1
[SwitchE-rip-1] network 10.0.0.0
[SwitchE-rip-1] version 2
[SwitchE-rip-1] undo summary
# Configure route redistribution from RIP to IS-IS on Switch D.
[SwitchD-rip-1] quit
[SwitchD] isis 1
[SwitchD–isis-1] import-route rip level-2
10 NULL
10 NULL
ISIS(1) IPv4 Level-2 Forwarding Table
-------------------------------------
IntCost ExtCost ExitInterface
10 NULL
10 NULL
10 NULL
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-2 Forwarding Table
-------------------------------------
IntCost ExtCost ExitInterface
20 NULL
20 NULL
10 NULL
155
VLAN200
VLAN300
NextHop
VLAN100 Direct
VLAN200 Direct
VLAN300 Direct
NextHop
VLAN300
VLAN300
VLAN300
Direct D/L/-
Direct D/L/-
Flags
D/L/-
D/L/-
D/L/-
Flags
192.168.0.1 R/-/-
192.168.0.1 R/-/-
Direct D/L/-