HPE 5800 Series Configuration Manual page 255

BGP local router ID : 1.1.1.1
Local AS number : 200
Total number of peers : 2
Peer
2.0.1.1
3.0.1.1
The output shows that Switch C has established two BGP neighborships with Switch A.
# Display route 1.1.1.0/24 on Switch C.
<SwitchC> display ip routing-table 1.1.1.0 24 verbose
Routing Table : Public
Summary Count : 4
Destination: 1.1.1.0/24
Protocol: BGP
Preference: 0
NextHop: 3.0.1.1
BkNextHop: 2.0.2.1
RelyNextHop: 3.0.2.1
Tunnel ID: 0x0
State: Active Adv GotQ
Tag: 0
Destination: 1.1.1.0/24
Protocol: BGP
Preference: 0
NextHop: 2.0.1.1
BkNextHop: 0.0.0.0
RelyNextHop: 2.0.2.1
Tunnel ID: 0x0
State: Inactive Adv GotQ
Tag: 0
Destination: 1.1.1.0/24
Protocol: O_ASE
Preference: 150
IpPrecedence:
NextHop: 3.0.2.1
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Inactive Adv
Tag: 1
Destination: 1.1.1.0/24
Protocol: O_ASE
Peers in established state : 2
AS MsgRcvd MsgSent OutQ PrefRcv Up/Down
200 7
200 7
Process ID: 0
Cost: 50
Interface: Vlan-interface101
BkInterface:Vlan-interface201
Neighbor : 3.0.1.1
Label: NULL
Age: 00h08m54s
Process ID: 0
Cost: 100
Interface: Vlan-interface201
BkInterface:
Neighbor : 2.0.1.1
Label: NULL
Age: 00h08m54s
Process ID: 1
Cost: 1
QosLcId:
Interface: Vlan-interface101
BkInterface:
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Age: 00h14m10s
Process ID: 1
244
10 0 0 00:01:05 Established
10 0 0 00:01:34 Established
State