Configuring A Description For An Ipv6 Peer Or Peer Group; Disabling Session Establishment To An Ipv6 Peer Or Peer Group; Logging Ipv6 Peer Or Peer Group State Changes - HPE 5800 Series Configuration Manual

Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family view.
3.
Allow the establishment of EBGP
4.
connection to an indirectly connected
peer or peer group.

Configuring a description for an IPv6 peer or peer group

Create the peer group before configuring a description for it.
To configure description for an IPv6 peer or peer group:
Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family
3.
view.
Configure a description for
4.
an IPv6 peer or peer group.
Disabling session establishment to an IPv6 peer or peer
group
Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family view.
3.
Disable session establishment to
4.
an IPv6 peer or peer group.

Logging IPv6 peer or peer group state changes

Step
Enter system view.
1.
Enter BGP view.
2.
Command
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name |
ipv6-address } ebgp-max-hop
[ hop-count ]
Command
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
description description-text
Command
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name |
ipv6-address } ignore
Command
system-view
bgp as-number
320
Remarks
N/A
N/A
N/A
Not configured by
default.
Remarks
N/A
N/A
N/A
Optional.
Not configured by default.
Remarks
N/A
N/A
N/A
Optional.
Not disabled by default.
Remarks
N/A
N/A