HPE 5800 Series Configuration Manual page 163

Interface: Vlan-interface100
Id IPV4.State
001 Up
After the DIS priority configuration, Switch A becomes the Level-1-2 DIS, and the pseudonode
is 0000.0000.0001.01.
# Display information about IS-IS neighbors and interfaces of Switch C.
[SwitchC] display isis peer
System Id: 0000.0000.0002
Interface: Vlan-interface100
State: Up HoldTime: 25s
System Id: 0000.0000.0001
Interface: Vlan-interface100
State: Up HoldTime: 7s
[SwitchC] display isis interface
Interface: Vlan-interface100
Id IPV4.State
001 Up
# Display information about IS-IS neighbors and interfaces of Switch D.
[SwitchD] display isis peer
System Id: 0000.0000.0001
Interface: Vlan-interface100
State: Up HoldTime: 9s
System Id: 0000.0000.0002
Interface: Vlan-interface100
State: Up HoldTime: 28s
[SwitchD] display isis interface
Interface: Vlan-interface100
Id IPV4.State
001 Up
Interface information for ISIS(1)
---------------------------------
IPV6.State MTU
Down 1497
Peer information for ISIS(1)
----------------------------
Circuit Id: 0000.0000.0001.01
Type: L1
Circuit Id: 0000.0000.0001.01
Type: L1
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Peer information for ISIS(1)
----------------------------
Circuit Id: 0000.0000.0001.01
Type: L2
Circuit Id: 0000.0000.0001.01
Type: L2
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
152
Type DIS
L1/L2 Yes/Yes
PRI: 64
PRI: 100
MTU Type DIS
1497 L1/L2 No/No
PRI: 100
PRI: 64
MTU Type DIS
1497 L1/L2 No/No