HPE 5800 Series Configuration Manual page 354
Layer 3 - ip routing
Hide thumbs
Also See for 5800 Series:
- Installation manual (126 pages) ,
- Configuration manual (412 pages) ,
- Configuration manuals (259 pages)
Table of Contents
Advertisement
# On Switch C, create an IPsec proposal named tran2, and set the encapsulation mode to
transport mode, the security protocol to ESP, the encryption algorithm to DES, and
authentication algorithm to SHA1. Create an IPsec policy named policy002, specify the
manual mode for it, reference IPsec proposal tran2, set the SPIs of the inbound and outbound
SAs to 54321, and the keys for the inbound and outbound SAs using ESP to gfedcba.
[SwitchC] ipsec proposal tran2
[SwitchC-ipsec-proposal-tran2] encapsulation-mode transport
[SwitchC-ipsec-proposal-tran2] transform esp
[SwitchC-ipsec-proposal-tran2] esp encryption-algorithm des
[SwitchC-ipsec-proposal-tran2] esp authentication-algorithm sha1
[SwitchC-ipsec-proposal-tran2] quit
[SwitchC] ipsec policy policy002 10 manual
[SwitchC-ipsec-policy-manual-policy002-10] proposal tran2
[SwitchC-ipsec-policy-manual-policy002-10] sa spi outbound esp 54321
[SwitchC-ipsec-policy-manual-policy002-10] sa spi inbound esp 54321
[SwitchC-ipsec-policy-manual-policy002-10] sa string-key outbound esp gfedcba
[SwitchC-ipsec-policy-manual-policy002-10] sa string-key inbound esp gfedcba
[SwitchC-ipsec-policy-manual-policy002-10] quit
Apply IPsec policies to IBGP peers:
5.
# Configure Switch A.
[SwitchA] bgp 65008
[SwitchA-bgp] ipv6-family
[SwitchA-bgp-af-ipv6] peer 1::2 ipsec-policy policy001
[SwitchA-bgp-af-ipv6] quit
[SwitchA-bgp] quit
# Configure Switch B.
[SwitchB] bgp 65008
[SwitchB-bgp] ipv6-family
[SwitchB-bgp-af-ipv6] peer 1::1 ipsec-policy policy001
[SwitchB-bgp-af-ipv6] quit
[SwitchB-bgp] quit
Apply IPsec policies to EBGP peers:
6.
# Configure Switch C.
[SwitchC] bgp 65009
[SwitchC-bgp] ipv6-family
[SwitchC-bgp-af-ipv6] peer ebgp ipsec-policy policy002
[SwitchC-bgp-af-ipv6] quit
[SwitchC-bgp] quit
# Configure Switch B.
[SwitchB] bgp 65008
[SwitchB-bgp] ipv6-family
[SwitchB-bgp-af-ipv6] peer ebgp ipsec-policy policy002
[SwitchB-bgp-af-ipv6] quit
[SwitchB-bgp] quit
Verify the configuration:
7.
# Display detailed IPv6 BGP peer information.
[SwitchB] display bgp ipv6 peer verbose
BGP Peer is 1::1,
remote AS 65008,
343
Advertisement
Table of Contents
Troubleshooting
