Table of Contents
Advertisement
6
Chassis views
HPE NW CW 5960 24x100G/200G+8x400GQDD
Sw
Figure6-1 Front panel
(1) System status LED (SYS)
(3) Fan tray status LED (FAN)
(5) QSFP56 port LED 1
(7) QSFP-DD port LED
Figure6-2 Rear panel
(1) Management Ethernet port
(3) Fan tray
(5) Power output status LED (OUT)
(7) Power input receptacle
(9) Power supply fault LED (!)
(11) System status LED (SYS)
(13) Management Ethernet port LED (LINK/ACT)
The HPE NW CW 5960 24x100G/200G+8x400GQDD Sw came with power supply slot PSU1 empty
and power supply slot PSU2 installed with a filler panel. You can install one or two power supplies for
the switch as needed. In Figure6-2, two HPE NW CW 5960 400G 1600W AC PSU (R9Y18A) are
installed in the power supply slots.
The HPE NW CW 5960 24x100G/200G+8x400GQDD Sw came with the six fan tray slots empty. You
must install six fan trays of the same model for the switch. In Figure6-2, six HPE NW CW 5960 400G
Prt2Pwr Fan Module (R9Y16A) are installed in the fan tray slots.
(2) Power supply status LED (PSU)
(4) QSFP56 port
(6) QSFP56 port LED 2
(8) QSFP-DD port
(2) USB port
(4) Fan tray alarm LED
(6) Power input status LED (IN)
(8) Power supply latch
(10) Reset button (RESET)
(12) Console port
27
Advertisement
Table of Contents
