Canon CLC5151 Reference Manual page 160

IMPORTANT
• The Saddle Stitch mode is available only if the Saddle Finisher-W2 is attached.
• The maximum number of sheets that can be saddle stitched is as follows:
- 15 sheets (64 to 80 g/m
- 10 sheets (81 to 253 g/m
• The paper sizes that can be saddle stitched are: 305 mm x 457 mm, A3, or A4R.
• The accuracy of folds created in the Saddle Stitch mode may vary depending on the paper type and the
number of sheets.
• Make sure to adjust the Booklet Tray guide to match the size of the output paper before outputting
saddle stitched prints, as shown below.
3
• A paper jam may occur if the Booklet Tray guide is not adjusted to match the size of the output paper.
3-28
Finisher-W1/Saddle Finisher-W2/Puncher Unit-AG1
2
)
2 )
305 mm x 457 mm or A3 A4R