1
Press
[System Settings]
[Receive Restriction for Each Function] under <Receiving Settings>.
2
Select [On] or [Off] next to the functions you want to restrict
[Done].
Details of each item are shown below.
[On]: The machine is restricted, and does not update the selected device information.
[Off]: The machine is not restricted, and updates the device information.
NOTE
• Before setting <Add. Functions Settings Value>, <Dept. ID>, or <Address Book> to 'Off', it is
necessary to set a default key in Network Settings (from the Additional Functions screen). (See
Chapter 3, "TCP/IP Network," in the Network Guide.)
• Changes are only effective after you restart the machine (the main power switch is turned OFF,
and then back ON). For instructions on restarting (turning the main power switch OFF and then
ON) the machine, see "Main Power and Control Panel Power," on p. 1-16.
[Device Information Delivery Settings]
Specifying Device Information Delivery Settings
press
6
6-55