Functions That Conserve Power - Canon CLC5151 Reference Manual

NOTE
• Settings made from the Additional Functions screen are not changed even if you press
• For instructions on customizing settings, see Chapter 4, "Customizing Settings."
• For instructions on specifying System Settings, see Chapter 6, "System Manager Settings."
• For instructions on specifying Printer Settings, see the PS/PCL/UFR II Printer Guide.
• For instructions on specifying Network Settings, see the Network Guide.
• [Copy Settings] is displayed only if the optional Color Image Reader-E1 or Color Image Reader-F1 is
attached.
• [Communications Settings] and [Address Book Setting] are displayed on the Additional Functions
screen only if the optional Color Image Reader-E1 or Color Image Reader-F1 is attached, and the Color
2
Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated or the optional
Super G3 FAX Board is installed.
• [Communications Settings], [Forwarding Settings], [Restrict the Send Function], and [Register LDAP
Server] are displayed on the System Settings screen only if the optional Color Image Reader-E1 or
Color Image Reader-F1 is attached, and the Color Universal Send Kit (standard-equipped for the
iR C4580i/iR C4080i) is activated or the optional Super G3 FAX Board is installed.
• [Auto Online/Offline] is displayed on the System Settings screen only if the optional Color Image
Reader-E1 or Color Image Reader-F1 is attached and optional printer function (standard-equipped for
the iR C4580i/iR C4080i) is available for use.

Functions That Conserve Power

You can conserve power efficiently when the machine is not being used by using the following
modes.
NOTE
• The touch panel display turns OFF when the machine enters one of the energy saving modes.
• The machine can continue to receive I-fax or fax documents, and process or print data sent from
computers even if it is in one of the energy saving modes described below.
Energy Saver Mode
The Energy Saver mode conserves energy by lowering the temperature of the fixing unit when the
machine is not used for a prolonged period of time. You can set the machine to enter the Energy Saver
mode by pressing
the control panel power switch to reactivate the machine.
NOTE
The Energy Saver mode's energy conservation level can be set to '-10%', '-25%', '-50%', or 'None'. (See
"Energy Saver Mode," on p. 4-35.)
2-12
Overview of the CLC5151/CLC4040/iR C4580i/iR C4080i
on the control panel. To reactivate the machine, press
.
again. You can also press