Canon CLC5151 Reference Manual page 250

3
4
4
5
6
7
8
9
4-70
Adjusting the Machine
IMPORTANT
This machine adjusts the toner and print speed according to the paper type. To make effective
adjustments, select the correct paper type.
Press [Test Print 1].
NOTE
If the paper which is appropriate for the test print is not loaded in a paper source, a message
asking you to load the appropriate paper appear. In this case, load the appropriate paper in a
paper source.
Place the first test print on the platen glass.
Place the test print face down on the platen glass, with the black bands along the top left back
edge of the platen glass by the arrow.
Press [Start Scan].
Remove the first test print from the platen glass
Place the second test print on the platen glass.
Place the test print face down on the platen glass, with the black bands along the top left back
edge of the platen glass by the arrow.
Press [Start Scan].
Remove the second test print from the platen glass
Print 3].
press [Test Print 2].
press [Test