Canon CLC5151 Reference Manual page 474

# 853
Cause 1
Remedy
Cause 1
Remedy
Cause 1
Remedy
Cause 1
Remedy
Cause 2
Remedy
8
# 854
Cause
Remedy
8-82
List of Error Messages
When trying to print a large number of pages, the job is not performed due to insufficient
memory resources.
Reduce the number of pages to print, or perform the print job again when no other jobs are
reserved.
The job could not be processed, because it was canceled from the printer driver while the
print data was being sent to the machine.
Try printing again.
The spool memory is full when Use Spooler in Network Settings in System Settings (from the
Additional Functions screen) is set to 'On', therefore, data received from the host could not be
spooled.
Set Use Spooler in Network Settings in System Settings (from the Additional Functions
screen) to 'Off', an d try sending the print data again. (See Chapter 3, "Using a TCP/IP
Network," in the Network Guide.)
The maximum number of receivable data exceeds the receive limit. (See Chapter 6,
"Receiving Documents," in the Sending and Facsimile Guide.)
Try printing the documents again after all current jobs are complete. If you still cannot print,
check the sent data
The number of secured documents exceeded the maximum limit that can be reserved at a
time.
Print or erase the secured documents that are stored in the machine, and try printing again.
Device information could not be delivered because the client machine has Restrictions for
Receiving Device Info. in Device Information Delivery Settings in System Settings (from the
Additional Functions screen) set to 'On'.
Try delivering device information again after setting Restrictions for Receiving Device Info. in
Device Information Delivery Settings in System Settings (from the Additional Functions
screen) to 'Off'.