Canon CLC5151 Reference Manual page 217

• In some cases, the energy consumption level in the Sleep mode is 'High' even when the energy
consumption level is set to 'Low' when:
- A job is being processed (including a forwarding job, report job, receive job, and sending a forwarding
done notice).
- The optional Security Expansion Board is installed.
- The optional Color Network Printer Unit is installed.
- Any of the following settings are set from the Additional Functions screen:
Report Settings
Settings
System Settings
Communications Settings
Network Settings
*1 If there is more than 120 minutes remaining before the specified time, the machine consumes the same amount of energy as when the
energy consumption level is set to 'Low'.
1
Press [Common Settings]
Mode].
Send
Fax
Memory RX Inbox
Settings
TCP/IP Settings
NetWare Settings
AppleTalk Settings
SMB Settings
E-Mail/I-Fax
[Energy Consumption in Sleep
The Daily Activity Report Time setting for
the Activity Report is set to 'On'.
The Daily Activity Report Time setting for
the FAX Activity Report is set to 'On'.
Time limit for receiving fax documents in
memory is set. *1
DHCP is set to 'On'.
NetWare is set to 'On'.
AppleTalk is set to 'On'.
SMB is set to 'On'.
The POP Interval setting is set to more
than '1' minute.
Specifying Common Settings
*1
*1
4
4-37