Canon CLC5151 Reference Manual page 220

4
4-40
Specifying Common Settings
IMPORTANT
• If a certain tray reaches its stacking limit, the machine automatically uses another tray that is
designated for the same function. However, it is recommended that you only designate one tray
for fax/I-fax documents to prevent them from getting lost.
• If no finisher is attached to the machine, and Tray B (Copy Tray-M1) is designated for copy or
print output, the sheets are output as face up, and are output in the reverse order from the order
of your originals.
If you want to switch Tray C (when the optional Finisher-W1 or Saddle
Finisher-W2 is attached):
Press [Specify Tray C]
NOTE
Changes are only effective after you restart the machine (the main power switch is turned OFF,
and then back ON).
If you want to select the tray home position (when the optional Finisher-W1 or
Saddle Finisher-W2 is attached):
Press the Tray Home Position drop-down list
while jobs are being processed.
Tray Home Position
[Tray A]: Tray A moves closer to the output area.
[Tray B]: Tray B moves closer to the output area.
[Off]: The tray home position is not set. The output tray stops at the position it is in when
printing finishes.
select [Finisher Top Tray] or [Center Tray of the Main Unit].
select the tray home position to be used