Offset Mode
The print output is shifted alternately to the front and back of the tray, in a vertical (portrait) orientation, or
a horizontal (landscape) orientation, depending on the orientation of your originals.
NOTE
If you press [Offset] when either the Collate or Group mode is set, each set of prints is shifted
approximately 30 mm before it is delivered to the output tray.
Staple Mode
The prints are automatically collated into sets arranged in page order and stapled. Prints are stapled in
the following places:
• If an original is placed on the platen glass:
Corner Staple Area
Upper Left
Upper Right
Lower Right
Lower Left
Upper Left
Upper Right
Lower Right
Lower Left
Double Staple Area
Left Side
Right Side
Left Side
Right Side
Finisher-W1/Saddle Finisher-W2/Puncher Unit-AG1
3
3-25