Canon CLC5151 Reference Manual page 135

a Color Image Reader-E1
The Color Image Reader-E1 enables the machine to scan
and read images for copying. Its platen cover secures the
originals placed on the platen glass.
b Copy Tray-M1
The Copy Tray-M1 provides an additional paper output tray.
c Copy Tray-N1
The Copy Tray-N1 provides an additional paper output tray.
d Color Image Reader-F1
The Color Image Reader-F1 enables the machine to scan
and read images for copying. Its feeder automatically feeds
originals onto the platen glass sheet by sheet. The feeder
automatically turns over the originals to make copies of
two-sided originals.
e Card Reader-D1
The Card Reader-D1 enables Department ID Management
to be performed by using the control card.
f Plain Pedestal-E1
Use the Plain Pedestal-E1 only when the Paper Deck-Y1 or
one of the finishers are attached, and when the Cassette
Feeding Unit-Z1 is not attached. This pedestal serves as an
electrical outlet for the finishers and the paper deck. You
can also use the pedestal as a means to adjust the height
of the machine.
g Finisher-X1
The Finisher-X1 is equipped with the following features:
Collate, Group, Offset, and Staple (Corner).
h Paper Deck-Y1
The Paper Deck-Y1 provides an additional source of paper
for printing jobs.
The Paper Deck-Y1 holds up to 2,700 sheets of paper
(80 g/m 2 ).
i Cassette Feeding Unit-Z1
The Cassette Feeding Unit-Z1 provides two additional
sources of paper for printing jobs.
Each paper drawer holds up to 550 sheets of paper
(80 g/m 2 ).
j Puncher Unit-AG1
The Puncher Unit-AG1 is equipped with the Hole Punch
feature.
k Staple Cartridge-D3
The Staple Cartridge-D3 can be attached to the optional
Saddle Finisher-W2 for saddle stitching.
l Staple-J1
The Staple-J1 can be attached to the optional finisher for
stapling (Corner and Double).
m Saddle Finisher-W2
The Saddle Finisher-W2 is equipped with the following
features: Collate, Group, Offset, and Staple (Corner,
Double, and Saddle Stitch).
n Finisher-W1
The Finisher-W1 is equipped with the following features:
Collate, Group, Offset, and Staple (Corner and Double).
System Configuration
3
3-3