Canon CLC5151 Reference Manual page 63

1
Press and hold the control panel power switch for more than three
seconds.
If the machine is in the Sleep mode, press the control panel power switch one time to cancel the
Sleep mode, and then press and hold the control panel power switch again for more than three
seconds.
The job confirmation screen is displayed.
NOTE
• You can also force the machine into the Shutdown mode by pressing
[Shutdown Mode].
• You cannot force the machine into the Shutdown mode in the following cases:
- When the machine is receiving and updating device information
- When the machine is importing or exporting data using the Remote UI function
• In a rare instance, the machine may not go into the Shutdown mode even if you press and hold
the control panel power switch for more than three seconds. In this case, follow the instructions
on the touch panel display to turn OFF the main power.
2
Confirm the jobs currently being processed or waiting to be processed
press [Start].
Jobs continue to be processed until [Start] is pressed.
To cancel the Shutdown mode, press [Cancel].
If there are no current jobs, proceed to step 4.
[Common Settings]
Main Power and Control Panel Power
1
1-23