Setting Automatic Delivery - Canon CLC5151 Reference Manual

Setting Automatic Delivery

You can set to automatically deliver device information at a specified time. You can also select
which information to deliver.
IMPORTANT
• When delivering device information, the following machines will not update their information:
- Machines which are processing a send job
- Machines importing or exporting data via the Remote UI
- Machines which are executing functions from the Additional Functions screen
• In addition to the above, machines which are having their address books accessed or are sending a
print job will not update their address books, and machines performing a print job will not update their
Printer Settings.
• Machines which could not receive device information because of a power failure or network trouble, will
not receive updated information until the first automatic update after the machine recovers.
NOTE
Device information is not delivered if the machine goes into the Shutdown mode, even if an automatic
delivery time is set.
1
Press
[Auto Delivery Settings] under <Transmitting Settings>.
2
Select [Everyday], [Select Days], or [Off].
If you select [Everyday]:
Select a number ([1] to [5])
[Next].
[System Settings]
enter the start time using
Specifying Device Information Delivery Settings
[Device Information Delivery Settings]
- (numeric keys)
6
press
6-49