Erasing User-Defined Text; Standard Paper For The Stack Bypass - Canon CLC5151 Reference Manual

Erasing User-Defined Text

1
Press
Watermark].
2
Select the text to erase
3
Press [Yes].
4
Press [Done].

Standard Paper for the Stack Bypass

You can set the paper size and type that the stack bypass uses beforehand. This setting is
useful if you always load the same paper size and type into the stack bypass.
If the Stack Bypass Standard Settings are stored when using the optional Fax function, you can
also use the stack bypass to receive faxes.
IMPORTANT
When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a
service repair, or the paper could jam.
NOTE
If you are using the stack bypass as a paper source for the Copy, Mail Box, and Fax (Receive) functions,
you must select the stack bypass when specifying the Drawer Eligibility for APS/ADS setting. (See "Auto
Paper Selection/Auto Drawer Switching," on p. 4-32.)
[Common Settings]
press [Erase].
[Register Characters for Page No./
Specifying Common Settings
4
4-47