Adjusting Creep (Displacement) Correction; Automatic Gradation Adjustment - Canon CLC5151 Reference Manual

3

Adjusting Creep (Displacement) Correction

This mode enables you to adjust the displacement of pages that occurs between the outermost
and centre page when the Booklet mode is set.
1
2
4
3

Automatic Gradation Adjustment

You can recalibrate the machine when you notice irregularities in the colour of the copies or
prints, such as when copies turn out to be different from the original in gradation, density, or
colour.
The following two types of gradation adjustments can be made:
Quick Adjustment
This is a quick and simple adjustment that is made to the gradation, density, and colour settings of the
machine. Recalibrations are made internally without outputting any test prints.
Full Adjustment
This is a precise recalibration that is made to the gradation, density, and colour settings of the machine.
The procedure involves making test prints and placing them on the platen glass for scanning. Once this
is complete, the machine automatically corrects the irregularities.
4-68
Adjusting the Machine
Press [ ] or [ ] to adjust the saddle stitch position
Press [Adjustment/Cleaning]
Correction].
Select the desired paper type
Press [ ] or [ ] to adjust the correction width
NOTE
To enter values in inches, press [Inch].
[Adjust Creep (Displacement)
press [Adjust].
press [OK].
press [OK].