Printing Installed Application Information - Canon CLC5151 Reference Manual

Printing Installed Application Information

You can print the MEAP application information, as well as certain system application
information.
NOTE
The information is printed as a report.
1
6
2
6-34
MEAP Settings
If you select [Off]:
Press [OK].
NOTE
• Before setting <Use SSL> to 'On', it is necessary to set a default key in Network Settings (from
the Additional Functions screen). (See Chapter 3, "TCP/IP Network," in the Network Guide.)
• The Use HTTP mode is enabled only after you restart the machine (the main power switch is
turned OFF, and then back ON). For instruction on restarting (turning the main power switch OFF
and then ON) the machine, see "Main Power and Control Panel Power, " on p. 1-16.
• Any changes made to <Use SSL> are also applied to <Use SSL> in Remote UI in System
Settings (from the Additional Functions screen).
Press [System Settings]
Information].
Press [Yes].
*******************************
***
*******************************
MEAP Contents : 00.73
MEAP Specifications : 5,6,7,9,10,11
Application Name : PortalService
Application ID/System Application Name : 0906ebfc-d39e-4149-9cc5-3caa528fcd03
Application Version : 2.0.0
Status : Active
Installed on : Thu Apr 14 15:53:24 GMT+09:00 2005
Vendor : Canon Inc.
License Status : Unnecessasry
Maximum Memory Usage : 220
Registered Service : com.canon.meap.service.portalservice.PortalService
[MEAP Settings]
System Information
***
[Print System