Ringing Timeout - Yealink SIP-T54S Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Procedure
Call timeout can only be configured using the configuration files.
Central Provisioning
(Configuration File)
Details of the Configuration Parameter:
phone_setting.ringback_timeout
Description:
Configures the duration time (in seconds) in the ringback state.
If it is set to 180, the phone will cancel the dialing if the call is not answered within 180
seconds.
Web User Interface:
None
Phone User Interface:
None

Ringing Timeout

Ringing timeout defines a specific period of time within which the IP phone will stop ringing if
the call is not answered.
Procedure
Ringing timeout can only be configured using the configuration files.
Central Provisioning
(Configuration File)
558
<y0000000000xx>.cfg
Parameter
<y0000000000xx>.cfg
Configure the duration time in the
ringback state.
Parameter:
phone_setting.ringback_timeout
Permitted Values
Integer from 0 to
3600
Configure the duration time in the
ringing state.
Parameter:
phone_setting.ringing_timeout
Default
180