Call Timeout - Yealink SIP-T54S Administrator's Manual

Description:
Configures the channel mode when an incoming intercom call is answered.
0-Speaker Mode
1-Headset Mode
Note: If you want to use a headset, physically connect your headset and activate the
headset mode for use. It is not applicable to CP860/CP920 IP phones.
Web User Interface:
None
Phone User Interface:
None
To configure intercom via web user interface:
Click on Features->Intercom.
1.
Select the desired values from the pull-down lists of Allow Intercom, Intercom Mute,
2.
Intercom Tone and Intercom Barge.
Click Confirm to accept the change.
3.
To configure intercom via phone user interface:
Press Menu->Features->Intercom.
1.
Press
2.
Allow, Intercom Mute, Intercom Tone and Intercom Barge fields.
Press the Save soft key to accept the change.
3.

Call Timeout

Call timeout defines a specific period of time within which the IP phone will cancel the dialing if
the call is not answered.
Parameters
or , or the Switch soft key to select the desired values from the Intercom
Configuring Basic Features
Permitted Values Default
557