Yealink SIP-T54S Administrator's Manual page 830

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
(X ranges from 1 to 10)
Description:
Configures the action or function for custom soft key X.
This value uses the same macro action string syntax as an Enhanced DSS key.
You can also invoke the EDK macro that was already defined. The macro name follows the
character "!".
Example:
softkey.1.action = !macro1
In this example, macro1 stands for the macro name configured by the parameter
"edk.edklist.X.mname".
Note: It works only if the values of the parameters "features.enhanced_dss_keys.enable"
and "softkey.X.enable" are set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
softkey.X.softkey_id
(X ranges from 1 to 10)
Description:
Configures the softkey id for custom softkey X.
Example:
softkey.1.softkey_id = custom_macro1
Note: It works only if the values of the parameters "features.enhanced_dss_keys.enable"
and "softkey.X.enable" are set to 1 (Enabled). To distinguish the custom softkey id and
system-defined softkey id, the custom softkey id displayed on the LCD screen will add a
"#" prefix (e.g., #custom_macro1).
Web User Interface:
None
Phone User Interface:
None
softkey.X.use.idle
(X ranges from 1 to 10)
Description:
804
Parameters Permitted Values
String
0 or 1
Default
Blank
0