Yealink SIP-T54S Administrator's Manual page 464

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
0-UAC
1-UAS
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860/CP920)
Note: It works only if the value of the parameter "account.X.session_timer.enable" is set to 1
(Enabled).
Web User Interface:
Account->Advanced->Session Refresher
Phone User Interface:
None
To configure session timer via web user interface:
Click on Account->Advanced.
1.
Select the desired account from the pull-down list of Account.
2.
Select the desired value from the pull-down list of Session Timer.
3.
Enter the desired time interval in the Session Expires(30~7200s) field.
4.
438
Parameters Permitted Values Default