Yealink SIP-T54S Administrator's Manual page 97

networks. All the available wireless networks will display in scanning list on the LCD screen. You
can store up to 5 frequently-used wireless networks on your phone and specify the priority for
them.
To use Wi-Fi feature on SIP-T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G IP phones,, make
Note
sure the Wi-Fi USB dongle is properly connected to the USB port on the back of the phone (
not applicable to CP920
When you connect the Ethernet cable, you can enable the Wi-Fi feature. But you have to disable
the Wi-Fi feature if you want to use the wired network.
Procedure
Wi-Fi feature can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
Phone User Interface
Details of the Configuration Parameters:
static.wifi.enable
Description:
Enables or disables the Wi-Fi feature.
).
<y0000000000xx>.
cfg
Parameters
Setting Up Your System
Configure Wi-Fi feature.
Parameter:
static.wifi.enable
Configure the Wi-Fi settings.
Parameters:
static.wifi.X.label
static.wifi.X.ssid
static.wifi.X.priority
static.wifi.X.security_mode
static.wifi.X.cipher_type
static.wifi.X.password
Configure Wi-Fi feature.
Configure the Wi-Fi settings.
Navigate to:
http://<phoneIPAddress>/servlet?p=netw
ork-wifi&q=load
Configure Wi-Fi feature.
Configure the Wi-Fi settings.
Permitted Values
0 or 1
It is
Default
0
71