Yealink SIP-T54S Administrator's Manual page 804

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
RPC Method
GetRPCMethods
SetParameterValues
GetParameterValues
GetParameterNames
GetParameterAttributes
SetParameterAttributes
Reboot
Download
Upload
ScheduleInform
FactoryReset
TransferComplete
AddObject
DeleteObject
For more information on TR-069, refer to
778
Description
This method is used to discover the set of methods
supported by the CPE.
This method is used to modify the value of one or more
CPE parameters.
This method is used to obtain the value of one or more
CPE parameters.
This method is used to discover the parameters
accessible on a particular CPE.
This method is used to read the attributes associated
with one or more CPE parameters.
This method is used to modify attributes associated
with one or more CPE parameters.
This method causes the CPE to reboot.
This method is used to cause the CPE to download a
specified file from the designated location.
File types supported by IP phones are:
Firmware Image

Configuration File

This method is used to cause the CPE to upload a
specified file to the designated location.
File types supported by IP phones are:
Configuration File

Log File

This method is used to request the CPE to schedule a
one-time Inform method call (separate from its periodic
Inform method calls) sometime in the future.
This method resets the CPE to its factory default state.
This method informs the ACS of the completion (either
successful or unsuccessful) of a file transfer initiated by
an earlier Download or Upload method call.
This method is used to add a new instance of an object
defined on the CPE.
This method is used to remove a particular instance of
an object.
Yealink TR-069 Technote
.