Yealink SIP-T54S Administrator's Manual page 294

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
language packs online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. For more
information on obtaining the language packs, refer to
Files/Resource Files
To modify translation of an existing language, do not rename the language file.
Note
The new added language must be supported by the font library on the IP phone. If the
characters in the custom language file are not supported by the phone, the IP phone will display
"?" instead.
Customizing a Language for Phone User Interface
The following table lists the available languages and associated language packs for the phone
user interface:
Available Language
English
Chinese Simplified
Chinese Traditional
French
German
Italian
Polish
Portuguese
Spanish
Turkish
Russian
When adding a new language pack for the phone user interface, the language pack must be
formatted as "X.GUI.name.lang" (X starts from 011, "name" is replaced with the language
name). If the language name is the same as the existing one, the existing language pack will be
overridden by the new uploaded one. We recommend that the filename of the new language
pack should not be the same as the existing one.
To customize a language file:
Open the desired language template file (e.g., 000.GUI.English.lang) using an ASCII editor.
1.
Modify the characters within the double quotation marks on the right of the equal sign.
2.
Don't modify the translation item on the left of the equal sign.
268
on page 142.
Obtaining Boot Files/Configuration
Associated Language Pack
000.GUI.English.lang
001.GUI.Chinese_S.lang
002.GUI.Chinese_T.lang
003.GUI.French.lang
004.GUI.German.lang
005.GUI.Italian.lang
006.GUI.Polish.lang
007.GUI.Portuguese.lang
008.GUI.Spanish.lang
009.GUI.Turkish.lang
010.GUI.Russian.lang