Yealink SIP-T54S Administrator's Manual page 108

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Procedure
VLAN can be configured using the following methods.
Central
Provisioning
(Configuration File)
Web User Interface
Phone User Interface
Details of Configuration Parameters:
static.network.vlan.internet_port_enable
Description:
Enables or disables VLAN for the Internet port.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->Active
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->WAN Port->VLAN
Status
static.network.vlan.internet_port_vid
82
<y0000000000xx>
.cfg
Parameters
Configure VLAN for the Internet port and PC
port manually.
Parameters:
static.network.vlan.internet_port_enable
static.network.vlan.internet_port_vid
static.network.vlan.internet_port_priority
static.network.vlan.pc_port_enable
static.network.vlan.pc_port_vid
static.network.vlan.pc_port_priority
Configure VLAN for the Internet port and PC
port manually.
Navigate to:
http://<phoneIPAddress>/servlet?p=network
-adv&q=load
Configure VLAN for the Internet port and PC
port manually.
Permitted Values
0 or 1
Integer from 1 to
4094
Default
0
1