Yealink SIP-T54S Administrator's Manual page 335

files.
You can ask the distributor or Yealink FAE for dial now template. You can also obtain the dial
now template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. For more
information on obtaining the dial now template, refer to
Files/Resource Files on page 142.
When editing a dial now template, learn the following:
<DialNow> indicates the start of a template and </DialNow> indicates the end of a

template.
When specifying the desired line(s) for the dial now rule, the valid values are 0 and line ID.

Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P)
E2/CP860/CP920 IP phones.
The following table lists valid values of line ID for each phone model.
Phone Model
SIP-
T54S/T48G/T48S/T46G/T46
S/T29G
SIP-T52S/T42G/T42S
SIP-T41P/T41S/T27P/T27G
SIP-T40P/T40G/T23P/T23G
SIP-T21(P) E2
At most 100 rules can be added to the IP phone.

The expression syntax in the dial now rule template is the same as that introduced in the
section Dial Plan using XML Template Files
To customize a dial now template:
Open the template file using an ASCII editor.
1.
Create dial now rules between <DialNow> and </DialNow>.
2.
For example:
<Data DialNowRule="1001" LineID="0" />
Where:
DialNowRule="" specifies the dial now rule.
LineID="" specifies the desired line(s) for this rule. When you leave it blank or enter 0, this dial
now rule will apply to all lines.
Obtaining Boot Files/Configuration
Values
0 stands for all lines
0~16
1~16 stand for line1~line16
0 stands for all lines
0~12
1~12 stand for line1~line12
0 stands for all lines
0~6
1~6 stand for line1~line6
0 stands for all lines
0~3
1~3 stand for line1~line3
0 stands for all lines
0~2
1~2 stand for line1~line2
on page 300.
Configuring Basic Features
Description
309