Auto Answer - Yealink SIP-T54S Administrator's Manual

Enter the desired times in the Auto Redial Times (1~300) field.
4.
Click Confirm to accept the change.
5.
To configure auto redial via phone user interface:
Press Menu->Features->Others->Auto Redial.
1.
Press
2.
Redial field.
Enter the waiting time (in seconds) in the Redial Interval field.
3.
Enter the desired times in the Redial Times field.
4.
Press the Save soft key to accept the change.
5.

Auto Answer

Auto answer allows IP phones to automatically answer an incoming call. By default, the IP
phones will not automatically answer the incoming call during a call or while dialing even if
auto answer is enabled
current call or cancel the dialing.
incoming call after ending all calls or canceling the dialing. Auto answer is configurable on a
per-line basis. Auto-Answer delay defines a period of delay time before the IP phone
automatically answers incoming calls.
Auto Answer Tone
Auto answer tone allows the IP phones to play a tone when an incoming call is automatically
answered. You can customize the auto answer tone or select specialized tone sets (vary from
country to country) for your IP phone. For more information, refer to
Auto Answer Mute
Auto answer mute allows IP phones to mute the local microphone when an incoming call is
automatically answered.
or , or the Switch soft key to select the desired value from the Auto
; and the incoming call will not be automatically answered if you end the
You can configure the IP phones to automatically answer the
Configuring Basic Features
Tones on page 834.
385