Yealink SIP-T54S Administrator's Manual page 602

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Procedure
USB Recording feature can be only configured using the configuration files.
Central
Provisioning
(Configuration File)
Details of Configuration Parameters:
features.usb_call_recording.enable
Description:
Enables or disables the call recording feature for the IP phone.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), you can record the active audio call for the phone by pressing the
Start REC soft key, and the recorded calls will be saved to the USB flash drive.
For SIP-T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G/CP860:
The default valu is 0.
For CP920:
The default value is 1.
Note: It is only applicable to SIP-
T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G/CP860/CP920 IP phones.
Web User Interface:
None
Phone User Interface:
None
features.auto_recording.enable
Description:
Enables or disables the call auto-recording feature for the IP phone.
576
<y0000000000xx
>.cfg
Parameters
Configure the recording feature on a phone
basis.
Parameter:
features.usb_call_recording.enable
Configure the automatic recording feature.
Parameter:
features.auto_recording.enable
Permitted Values
0 or 1
0 or 1
Default
Refer to
the
following
content
0