Yealink SIP-T54S Administrator's Manual page 314

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Procedure
Softkey layout can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
Details of Configuration Parameter:
phone_setting.custom_softkey_enable
Description:
Enables or disables custom soft keys layout feature.
0-Disabled
1-Enabled
Web User Interface:
Settings->Softkey Layout->Custom Softkey
Phone User Interface:
None
To configure softkey layout via web user interface:
Click on Settings->Softkey Layout.
1.
Select the desired value from the pull-down list of Custom Softkey.
2.
Select the desired state from the pull-down list of Call States.
3.
Select the desired soft key from the Unselected Softkeys column and then click
4.
The selected soft key appears in the Selected Softkeys column. If more than four soft
keys are selected, a More soft key will appear on the LCD screen, and the selected soft
keys are displayed in two pages.
Repeat the step 4 to add more soft keys to the Selected Softkeys column.
5.
To remove the soft key from the Selected Softkeys column, select the desired soft key
6.
and then click
To adjust the display order of soft keys, select the desired soft key and then click
7.
or .
288
<y0000000000xx
>.cfg
Parameter
.
Configure the softkey layout.
Parameter:
phone_setting.custom_softkey_enable
Configure the softkey layout.
Navigate to:
http://<phoneIPAddress>/servlet?p=settings-
softkey&q=load
Permitted Values
0 or 1
Default
0
.