Yealink SIP-T54S Administrator's Manual page 493

Press
1)
Always Forward field.
Enter the destination number you want to forward all incoming calls to in the
2)
Forward to field.
(Optional.) Enter the always forward on code and off code respectively in the On
3)
Code and Off Code field.
If you select Busy Forward:
b)
Press
1)
Busy Forward field.
Enter the destination number you want to forward all incoming calls to when the
2)
IP phone is busy in the Forward to field.
(Optional.) Enter the busy forward on code and off code respectively in the On
3)
Code and Off Code field.
If you select No Answer Forward:
c)
Press
1)
No Answer Forward field.
Enter the destination number you want to forward all unanswered incoming calls
2)
to in the Forward to field.
(Optional.) Enter the no answer forward on code and off code respectively in the
3)
On Code and Off Code field.
Press
4)
forwarding from the After Ring Time field.
The default ring time is 12 seconds.
Press the Save soft key to accept the change.
4.
To configure call forward in custom mode via phone user interface:
Press Menu->Features->Call Forward.
1.
Press or to select the desired account, and then press the Enter soft key.
2.
Press or to select the desired forwarding type, and then press the Enter soft key.
3.
Depending on your selection:
4.
If you select Always Forward, you can configure it for a specific account.
a)
Press
1)
Always Forward field.
Enter the destination number you want to forward all incoming calls to in the
2)
Forward to field.
(Optional.) Enter the always forward on code and off code respectively in the
3)
On Code and Off Code field.
You can also configure the always forward for all accounts. After the always forward
was configured for a specific account, do the following:
Press
1)
or , or the Switch soft key to select the desired value from the
or , or the Switch soft key to select the desired value from the
or , or the Switch soft key to select the desired value from the
or , or the Switch soft key to select the ring time to wait before
or , or the Switch soft key to select the desired value from the
or to highlight the Always Forward field.
Configuring Basic Features
467