Yealink SIP-T54S Administrator's Manual page 1006

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Details of the Configuration Parameter:
static.network.span_to_pc_port
Description:
Enables or disables the IP phone to span data packets received from the Internet port to
the PC port.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), all data packets from Internet port can be received by PC port.
Note: It is not applicable to CP860/CP920 IP phones. It works only if the value of the
parameter "static.network.pc_port.enable" is set to 1 (Auto Negotiation). If you change
this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Span to PC->Span to PC Port
Phone User Interface:
None
To enable span to PC port via web user interface:
Click on Network->Advanced.
1.
980
Parameter
http://<phoneIPAddress/servlet?p
=network-adv&q=load
Permitted Values
0 or 1
Default
0