Yealink SIP-T54S Administrator's Manual page 152

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
None
static.network.802_1x.client_cert_url
Description:
Configures the access URL of the device certificate.
Example:
static.network.802_1x.client_cert_url = http://192.168.1.10/client.pem
Note: It works only if the value of the parameter "static.network.802_1x.mode" is set to 2
(EAP-TLS). The format of the device certificate must be *.pem.
Web User Interface:
Network->Advanced->802.1x->Device Certificates
Phone User Interface:
None
To configure the 802.1X authentication via web user interface:
Click on Network->Advanced.
1.
In the 802.1x block, select the desired protocol from the pull-down list of 802.1x Mode.
2.
If you select EAP-MD5:
a)
Enter the user name for authentication in the Identity field.
1)
Enter the password for authentication in the MD5 Password field.
2)
126
Parameters Permitted Values Default
URL within 511
Blank
characters