Yealink SIP-T54S Administrator's Manual page 862

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
Condition
Ring Back
Busy
Congestion
Call Waiting
Dial Recall
Info
Stutter
Message
Auto Answer
Procedure
Tones can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
836
Description
Ring-back tone
When the callee is busy
When the network is congested
Call waiting tone (For more information on call
waiting, refer to Call Waiting)
When receiving a call back
When receiving a special message
When receiving a voice mail (For more information
on voice mail tone, refer to
When receiving a text message (For more
information on text message, refer to
Service (SMS))
When automatically answering a call (For more
information on auto answer, refer to
<y0000000000xx>.cfg
Voice Mail Tone)
Short Message
Auto Answer)
Configure the tones for the IP
phone.
Parameters:
voice.tone.country
voice.tone.dial
voice.tone.secondary_dial
voice.tone.ring
voice.tone.busy
voice.tone.congestion
voice.tone.callwaiting
voice.tone.dialrecall
voice.tone.info
voice.tone.stutter
voice.tone.message
voice.tone.autoanswer
Configure the tones for the IP
phone.
Navigate to: